CD Electric services the top manufacturers, like Siemens, ABB/Baldor, and U.S. Motors/Nidec. However, we also gladly service motors from almost any other manufacturer. From bearing failure to coil problems, CD can repair it. Specialized fractional (smaller) motors, to large 6K horsepower motors.
- CD Electric has the most experienced craftsmen in the United States. This experience ensures the most efficient and reliable service.
- CD Electric works around the customers’ schedule, 24/7, emergency response.
Products We Offer
Since 1986, COILTEC has specialized in high quality, quick-turn form coils. Sticking to what we know, we don’t try to be specialists in everything. We focus on the stator, armature and rotor coils that are the bread and butter work of our customers
AC Stator Coils
Up to 6900 Volts, up to 85 inches long, simple to complicated, standard to uniquely customized
DC Armature Coils
Our second-highest product by volume
DC Rotor Coils
Complicated wound and push-through coils are routine for us
Hand Wound Coil Kits
Everything you need to rewind your motor in-house
Special Insulation Systems
Our hundreds of years of collective experience come together with our supply chain partnerships, enabling us to rapidly fabricate your form coils in any of the configurations listed here.
Class F, VPI-Ready System
Most requested form coil, 100% VPI mica coverage under Dacron armor tape
Class H, VPI-Ready System
100% VPI mica coverage under Hesgon Type A fiberglass tape
.
Sealed, VPI-Ready System
100% VPI Mica coverage under Dacron armor tape, with felt pads under the outside leads
6600 Volt, VPI-Ready System
Six or more layers of 100% VPI Mica tape coverage under Dacron armor tape, with an additional layer of Corona tape through the slot section
Dip & Bake
Class F Dip & Bake
High dielectric strength mica tape under a single layer of Hesgon Type A fiberglass tape, dipped in soluble impregnating resin and baked @ 300 degrees F
Sealed Dip & Bake
High dielectric strength mica tape under a single layer of Hesgon Type A fiberglass tape, with high temp silicone applied under the exit leads, dipped in soluble impregnating resin and baked @ 300 degrees F
.
6600 Volt Dip & Bake
High dielectric strength mica tape under a single or double layer of Res-I-Flex tape, baked at 250 degrees F, finished with a coat of semi-conductive paint on the slot section
B-Stage (Resin-Rich) System
B-Stage (Resin-Rich) System
100% Mica coverage under a single layer of Res-I-Flex tape, with high temp silicone applied under the exit leads, baked under the watchful eyes of our craftsmen